Please use this identifier to cite or link to this item: http://10.9.150.37:8080/dspace//handle/atmiyauni/1048
Full metadata record
DC FieldValueLanguage
dc.contributor.authorVaghela, C.-
dc.contributor.authorKikani, P.-
dc.contributor.authorChotai, N.-
dc.date.accessioned2023-05-24T03:10:21Z-
dc.date.available2023-05-24T03:10:21Z-
dc.date.issued2015-
dc.identifier.citationVaghela, C. ,Kikani, P. ,& Chotai, N. (2015). Analysis of Process Parameters for Resistance Spot Welding on Cold Reduced Low Carbon Steel. International Journal of Futuristic Trends in Engineering and Technology, ISSN: 2348-5264 (Print), ISSN: 2348-4071 (Online) Vol. 2 (12), 2015en_US
dc.identifier.issn2348-4071-
dc.identifier.urihttp://10.9.150.37:8080/dspace//handle/atmiyauni/1048-
dc.description.abstractResistance Spot Welding (RSW) is generally used for joining reason particularly in vehicles industry and manufacture of sheet metal because of its vigor, velocity, adaptability and minimal effort operation. In any auto, there are 3000-6000 spot welds which demonstrate the level significance of the resistance spot welding. The metal sheets are all the more every now and again utilized as a part of car industry particularly as an option material for auto bodies. In this article the far reaching rundown concerning innovation of resistance spot welding of combinations was exhibited. Since terminal power is an essential procedure parameter in little scale resistance spot welding (SSRSW), its impacts on the electrical, warm and mechanical conduct of the welding process The welding timetables, electric parameters of welding, anodes materials and cathodes life time by resistance spot welding metal were depicted. Couples of illustrations specifically from car industry were displayed and focal points of material sheets as a material for some vehicle parts were likewise talked about. It is an entangled procedure, which includes associations of warm, mechanical, electrical and metallurgical marvel. Controlling the welding parameters assumes an imperative part on the nature of the weld. It relies on upon the resistance of the base metal and the measure of current streaming to deliver the warmth important to make the spot weld. There are different procedure parameters (weld current, weld time, cathode power) which influence the weld chunk and its quality. So it is important to upgrade the procedure parameters of resistance spot welding procedure. The test studies have been led under shifting weight, current and time on quality trademark, Hardness and Weld life. In this paper, different improvement strategies are examined and the utilization of the Taguchi technique to decide the ideal procedure parameters is accounted for. The setting of welding parameters was resolved utilizing Taguchi test plan technique and L9 orthogonal cluster was picked. The ideal welding parameter for multi-targets was acquired utilizing multi sign to commotion proportion (MSNR). This is on account of the Taguchi strategy is an orderly utilization of outline and examination of tests with the end goal of planning and enhancing item quality at the configuration stage. Using so as to weld parameters settings were dictated the Taguchi trial plan strategy. The level of significance of the welding parameters on the ductile shear quality is dictated by utilizing examination of difference (ANOVA).en_US
dc.language.isoenen_US
dc.publisherInternational Journal of Futuristic Trends in Engineering and Technologyen_US
dc.subjectResistance Spot Weldingen_US
dc.subjectTaguchi Methoden_US
dc.subjectANNOVA Methoden_US
dc.subjectProcess Parametersen_US
dc.subjectCold Reduced Low Carbon Steelen_US
dc.subjectMinitab Softwareen_US
dc.titleAnalysis of Process Parameters for Resistance Spot Welding on Cold Reduced Low Carbon Steelen_US
dc.typeArticleen_US
Appears in Collections:01 Journal Articles

Files in This Item:
File Description SizeFormat 
842) 13029_Pratik Tansukhray Kikani.pdf673.1 kBAdobe PDFView/Open
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.