1. DSpace at ATMIYA UNIVERSITY
  2. 01. Faculty of Engineering and Technology
  3. 05. Department of Mechanical Engineering
  4. 03. M.TECH ME Student Dissertation
  5. M.TECH ME Student Dissertation
Please use this identifier to cite or link to this item: http://10.9.150.37:8080/dspace//handle/atmiyauni/1334
Full metadata record
DC FieldValueLanguage
dc.contributor.authorChauhan, Dilipbhai B.-
dc.date.accessioned2024-02-21T06:01:38Z-
dc.date.available2024-02-21T06:01:38Z-
dc.date.issued2022-12-
dc.identifier.citationChauhan, D. B. (2023). Dissertation Report On Investigation Of Cutting Conditions On Tool Life And Material Removal Rate In Turning Of P20 Using Cermate And Tungsten Carbide Insert. Department of Mechanical Engineering Faculty of Engineering and Technology Atmiya University.en_US
dc.identifier.urihttp://10.9.150.37:8080/dspace//handle/atmiyauni/1334-
dc.description.abstractThe performance of turning operation is depend upon the tool life and MRR of the tool material AISI P20 material is employed in making of dies in different industry. Tungsten carbide is most suitable insert material used for turning of AISI P20.but now days industries need higher productivity and includes higher tool life and higher MRR with same parameters so one should compare the tool material with the advance one cermet insert material is the combination of ceramic and metal material. It fulfills the both the requirement of tool life and MRR so the current investigation is to experimental comparison of tungsten carbide and cermet insert for the turning of AISI P20 material based on the experimentation work the best suitable insert material has been identifieden_US
dc.language.isoenen_US
dc.subjectAISI P-20 tool steelen_US
dc.subjectTurningen_US
dc.subjectTool lifeen_US
dc.subjectMRRen_US
dc.titleDissertation Report On Investigation Of Cutting Conditions On Tool Life And Material Removal Rate In Turning Of P20 Using Cermate And Tungsten Carbide Inserten_US
dc.typeThesisen_US
Appears in Collections:M.TECH ME Student Dissertation

Files in This Item:
File Description SizeFormat 
Dissertation Report On Investigation Of Cutting Conditions On Tool Life And Material Removal Rate In Turning Of P20 Using Cermate And Tungsten Carbide Insert.pdf1.3 MBAdobe PDFView/Open
Show simple item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.